Size distributions and sources of elements in particulate matter at curbside, urban and rural sites in Beijing

Size distributions of 29 elements in aerosols collected at urban, rural and curbside sites in Beijing were studied. High levels of Mn, Ni, As, Cd and Pb indicate the pollution of toxic heavy metals cannot be neglected in Beijing. Principal component analysis (PCA) indicates 4 sources of combustion emission, crust related sources, traffic related sources and volatile species from coal combustion. The elements can be roughly divided into 3 groups by size distribution and enrichment factors method (EFs). Group 1 elements are crust related and mainly found within coarse mode including Al, Mg, Ca, Sc, Ti, Fe, Sr, Zr and Ba; Group 2 elements are fossil fuel related and mostly concentrated in accumulation mode including S, As, Se, Ag, Cd, Tl and Pb; Group 3 elements are multi-source related and show multi-mode distribution including Be, Na, K, Cr, Mn, Co, Ni, Cu, Zn, Ga, Mo, Sn and Sb. The EFs of Be, S, Cr, Co, Ni, Cu, Ga, Se, Mo, Ag, Cd, Sb, Tl and Pb show higher values in winter than in summer indicating sources of coal combustion for heating in winter. The abundance of Cu and Sb in coarse mode is about 2-6 times higher at curbside site than at urban site indicating their traffic sources. Coal burning may be the major source of Pb in Beijing since the phase out of leaded gasoline, as the EFs of Pb are comparable at both urban and curbside sites, and about two times higher in winter than that in summer.     

Air quality management in China: Issues, challenges, and options

This article analyzed the control progress and current status of air quality,identified the major air pollution issues and challenges in future,proposed the long-term air pollution control targets,and ...     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.     

Novel Co-Mg-Al-Ti-O catalyst derived from hydrotalcite-like compound for NO storage/decomposition

Catalysts of Co_1.5Mg_1.5/Al_0.9Ti_0.1O and Co_1.5Mg_1.5/AlO were successfully prepared by calcinations of corresponding hydrotalcite-like compounds at 800℃ for 4 hr. The derived oxides were of spinel phase and a small quantity of Ti substitution did not change the crystal purity. Their catalytic performance for the NO storage/decomposition was investigated. Ti incorporation enhanced the NO decomposition activity while has an opposite effect on the storage capacity of catalyst. In situ FT-IR spectra of the catalysts showed that the final adsorption species on the catalysts was coordinated nitrates/nitrites. In addition, NO storage/decomposition mechanism has been discussed on the basis of these observations.     

贵阳市道路灰尘和土壤重金属来源识别比较

通过对89个城市土壤样和78个道路灰尘样中重金属含量的对比,利用多元统计方法识别研究区的元素来源.结果显示道路灰尘元素含量一般高于土壤.就均值而言,灰尘中Hg、Cd、Pb、Cu、Cr含量超过土壤中相应元素含量,灰尘中Zn含量与土壤中Zn含量相当,只有灰尘中As含量略低于土壤.灰尘中元素含量都高于中国和贵州表层土壤背景值,土壤中元素含量除Pb外都高于中国和贵州表层土壤背景值.Cd,Cr,Pb,Hg,Cu和Zn含量较高主要是受人为因素的影响.贵阳市道路灰尘和土壤中8种元素有着不同的来源.相关分析、主成分分析表明交通排放等人为因素是重金属主要来源,外来客土也是重金属重要来源;灰尘Pb主要来源于交通排放和钢铁厂;而土壤Cr具有复合污染的特征,主要来源于外来客土.     

连续流动分析法测定降水中铵盐的可行性研究

铵盐是降水监测的重要指标之一,它对降水中的酸性物质具有中和作用。将连续流动分析法应用于降水中铵盐的检测,并对该方法的检出限、精密度、加标回收率等一系列实验室质量要求进行了测定;在此基础上,用连续流动分析法和国家标准分析方法进行比对试验。对测试结果进行数理统计分析后证明,连续流动分析法与国标方法无显著性差异。     

事故车辆影响下的城市三车道道路交通流仿真

为探究事故车辆对城市三车道道路交通影响机制,首先,分析考虑事故车辆的城市三车道道路交通流特征;然后,构建左车道优先且考虑主动抢道和被动抢道行为的元胞自动机交通流模型;最后;研究事故持续时间td变化时事故车辆分别位于M道和R道的城市道路交通流演化。结果表明:事故车辆会形成交通瓶颈,呈现上游车辆聚集下游车辆稀疏的时空特征,诱发交通拥堵,事故车辆对三车道交通影响明显小于两车道情形;且事故车辆位于R车道对道路交通流影响比事故车辆位于M车道更小,但这种影响的差异随进车率pe增加而减小。     

基于属性区间识别模型的天然气管道事故后果评价技术研究

为了准确评价天然气管道事故后果严重程度,提高管道安全管理水平,以属性区间识别理论为基础,建立了天然气管道事故后果综合评价的属性区间识别模型;同时,为解决属性区间识别模型中的权重确定问题,在收集天然气管道历史事故数据的基础上,建立投影寻踪-遗传算法模型,从历史事故数据中获得客观权重;最后依据置信度准则对天然气管道事故后果进行属性识别,实现天然气管道事故后果严重程度的等级划分.应用所建立的模型对近年来发生的13起天然气管道事故进行实例验证,结果表明,属性区间识别模型操作简单,结果合理,具有一定的参考价值,为天然气管道事故后果评价提供了一种新的方法,进一步可为天然气管道安全管理和应急救灾措施的制定提供技术支持.     

水生野生动物自然保护区河流生态系统服务功能价值评价——以长江湖北宜昌中华鲟自然保护区为例

论文根据长江湖北宜昌中华鲟自然保护区的特点,尝试对保护区所在江段河流生态系统服务价值建立了评价体系,主要对该保护区河流生态系统服务价值中的直接使用价值和间接使用价值进行了评估。结果表明:保护区生态功能服务年总价值为59 920×104元,以间接使用价值为主要体现,占总价值的66.4%。间接价值中以珍稀水生野生动物(中华鲟、胭脂鱼)的保护价值最高,为27 290×104元/年,占总价值的45.54%,远远超过了其科研价值(410×104元/年)。表明保护区的建立对珍稀水生野生动物保护及其特有生境的保存、产卵栖息地保留方面具有重要意义,但政府应加强科研投入。     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.